HVAC insulation
Technical HVAC insulation for heating, ventilation, and air conditioning systems is a fundamental step toward ensuring energy efficiency and indoor comfort in any building. Premium insulation effectively prevents thermal losses, eliminates condensation build-up, and significantly dampens operational noise. This not only drives substantial cost savings on heating and cooling but also maintains an optimal indoor climate across the entire facility
Technology products
Elastomeric Rubber Insulation Sheets
Product Description
Elastomeric rubber foam mats are a flexible and highly efficient tank insulation, pipe insulation, HVAC insulation and duct protection material featuring a closed-cell structure. The material is available in several variations tailored to diverse installation requirements: plain (unfaced) for standard indoor use, faced with non-combustible aluminum foil for areas exposed to thermal radiation, and self-adhesive options that significantly simplify the installation process. These mats exhibit high resistance to oils and adverse weather conditions, maintain excellent flexibility, and do not support fungal or mold growth
Product Application
Elastomeric rubber foam insulation mats are engineered for thermal insulation and condensation prevention on the outer surfaces of air ducts and large-diameter pipelines. The material is widely used across heating, cooling, ventilation, and air conditioning (HVAC) systems.
Installation: Mounted by bonding the mats to the target surface using a special manufacturer-recommended adhesive. Joints between the sheets must be tightly sealed and, if necessary, additionally reinforced with insulation tape.
Outdoor Use: For outdoor applications where the material is exposed to direct sunlight, a protective jacket coating or UV-resistant paint must be applied within 5 days after installation.
Indoor Use: In indoor environments with natural daylight, aluminum foil-faced mats can be used without any additional UV protection.
Product Specifications
- Material: Elastomeric Rubber Foam
- Types: Plain (unfaced), self-adhesive, aluminum foil-faced, self-adhesive with aluminum foil.
- Thickness: 6; 9; 13; 19; 25; 32 mm
- Width: 1000 – 1200 mm
- Length: 3000 – 60000 mm
- Facing Options: Unfaced, non-combustible aluminum foil, self-adhesive backing film.
- Reaction to Fire (Fire Class): Class E
- Operational Temperature Range: From -50 °C to +105 °C
- Water Vapor Diffusion Resistance ():
- Key Properties: High resistance to oils and weathering, superior flexibility, anti-fungal properties.
- Packaging Material: Polyethylene film (PE Film)
- Standards & Compliance: TS EN 14303, EN 822, EN 823, TS EN 12667, TS EN 13501-1, EN 12086
Declared Thermal Conductivity ():
- at -20 °C: 0.031 W/m·K
- at 0 °C: 0.034 W/m·K
- at 20 °C: 0.036 W/m·K
- at 40 °C: 0.037 W/m·K
- at 60 °C: 0.038 W/m·K
- at 80 °C: 0.043 W/m·K
Packaging Dimensions for 1000 mm Width Mats:
- Thickness 6 mm: Length 36000 mm — 36 per pack
- Thickness 9 mm: Length 24000 mm — 24 per pack
- Thickness 13 mm: Length 18000 mm — 18 per pack
- Thickness 19 mm: Length 12000 mm — 12 per pack
- Thickness 25 mm: Length 9000 mm — 9 per pack
- Thickness 32 mm: Length 7000 mm — 7 per pack
- Thickness 40 mm: Length 6000 mm — 6 per pack
- Thickness 50 mm: Length 5000 mm — 5 per pack
Packaging Dimensions for 1200 mm Width Mats:
- Thickness 6 mm: Length 32000 mm — 38.40 per pack
- Thickness 9 mm: Length 24000 mm — 28.80 per pack
- Thickness 13 mm: Length 16000 mm — 19.20 per pack
- Thickness 19 mm: Length 11000 mm — 13.20 per pack
- Thickness 25 mm: Length 8000 mm — 9.60 per pack
- Thickness 32 mm: Length 6000 mm — 7.20 per pack
Elastomeric Rubber Pipe Insulation
Product Description
This premium HVAC insulation, pipe insulation is manufactured from high-quality synthetic rubber featuring a closed-cell structure (Closed Cell Synthetic Rubber). The material exhibits exceptional flexibility, which greatly simplifies on-site installation processes. It provides durable resistance against oils and adverse weather conditions, while naturally preventing fungal and mold growth. The insulation holds a Class E reaction to fire rating and safely withstands operational temperatures ranging from -50 °C up to +105 °C. All products are securely packed in heavy-duty cardboard boxes.
Product Application
This technical insulation is specifically engineered for the thermal protection of pipelines and highly efficient condensation control. Due to its superior water vapor diffusion resistance factor (mu \ge 5000), it reliably stops condensation from forming on cold metal surfaces.
The insulation is produced in a wide variety of inner diameters tailored precisely to fit standard copper and steel pipes:
- Available Inner Diameters: 6 mm to 114 mm.
- Available Insulation Thicknesses: 6, 9, 13, 19, 25, and 32 mm.
This extensive dimension range ensures an optimal, energy-saving fit for diverse HVAC, refrigeration, and industrial engineering systems
Product Specifications
- Material: Closed Cell Synthetic Rubber
- Standard Length: 2000 mm (Total length ranges from 2000 to le 50000 mm)
- Reaction to Fire (Fire Class): Class E
- Operational Temperature Range: From -50 °C to +105 °C
- Water Vapor Diffusion Resistance (mu): ge 5000
- Material Durability: Good UV resistance, good oil resistance, good weatherability, excellent flexibility, zero fungal growth.
- Packaging Material: Cardboard Box
- Standards & Compliance: TS EN 14303, TS EN 822, TS EN 13467, TS EN 823, TS EN 13501-1, TS EN 12667, EN 12086
Declared Thermal Conductivity (lambda):
- at -20 °C: 0.031 W/m·K
- at 0 °C: 0.034 W/m·K
- at 25 °C: 0.036 W/m·K
- at 40 °C: 0.041 W/m·K
- at 60 °C: 0.042 W/m·K
- at 80 °C: 0.043 W/m·K
Available Inner Diameters (mm):
- 6; 8; 10; 12; 15; 18; 20; 22; 25; 28; 35; 42; 48; 54; 60; 64; 70; 76; 80; 89; 102; 108; 114.
Available Wall Thicknesses (mm):
- 6; 9; 13; 19; 25; 32.
Industrial Stone Wool Slabs
Product Description
Industrial stone wool slabs are high-performance thermal insulation boards designed for heavy-duty engineering systems, including large-scale HVAC insulation networks. Available either unfaced or with various factory-applied facings—such as yellow/black glass tissue and aluminum foil—these slabs are manufactured in two distinct density options: 70 kg/m³ and 110 kg/m³. Each density is optimized with specific technical properties to provide superior structural stability, acoustic dampening, and thermal efficiency for industrial air handling and ventilation systems.
Product Application
The outstanding non-combustible properties of these industrial stone wool slabs make them an ideal choice for high-temperature thermal, acoustic, and fire isolation within demanding HVAC insulation projects.
Installation Method: The technical slabs are mounted onto flat or structured surfaces using specialized insulation pins and retaining washers.
Cladding & Framing: Once secured, they are typically covered with an outer sheet metal jacketing (cladding) or integrated into a structural framework built on the surface.
Prefabricated Systems: These high-density boards are also perfectly suited for use inside prefabricated sandwich panels and modular air distribution casings.
Product Specifications
- Material: Stone Wool (Mineral Rock Wool)
- Available Densities: 70 kg/m³ and 110 kg/m³
- Standard Dimensions: Length 1200 mm $\times$ Width 600 mm
- Available Thicknesses: 25; 40; 50; 60; 80; 100; 120 mm
- Facing Variations: Plain (unfaced), yellow glass tissue, black glass tissue, or aluminum foil faced (alu-foil).
- Reaction to Fire (Fire Class): Class A1 (Non-combustible)
- Water Vapor Diffusion Resistance ($\mu$): 1
- Packaging Material: Polyethylene film (PE Film)
- Standards & Compliance: TS EN, TS EN ISO
Thermal Conductivity (lambda) for 70 kg/m³ Density:
- at 50 °C: 0.046 W/m·K
- at 100 °C: 0.056 W/m·K
- at 150 °C: 0.070 W/m·K
- at 200 °C: 0.080 W/m·K
- at 250 °C: 0.101 W/m·K
Thermal Conductivity ($\lambda$) for 110 kg/m³ Density:
- at 50 °C: 0.047 W/m·K
- at 100 °C: 0.057 W/m·K
- at 150 °C: 0.072 W/m·K
- at 200 °C: 0.081 W/m·K
- at 250 °C: 0.103 W/m·K
IZOCAM Foil-Faced Mineral Wool Insulation Rolls
Product Description
Foil-Faced mineral wool rolls are lightweight, highly flexible insulation blankets manufactured from premium glass wool and faced on one side with reinforced aluminum foil. Due to their exceptional elasticity and convenient roll format, these mats are ideal for wrapping complex utility lines and ductwork. The integrated aluminum foil serves as a durable, factory-applied protective outer facing:
Glass Wool Core: Delivers outstanding thermal performance with minimal structural weight load.
Aluminum Foil Facing: Acts as a vital vapor barrier and heat reflector, safeguarding the entire system against energy loss
Product Application
This foil-faced glass wool insulation is engineered specifically for the thermal protection of engineering systems where flexibility, low weight, and absolute moisture protection are required.
Ductwork Insulation: Perfect for wrapping rectangular and round ventilation and air conditioning channels within commercial and industrial HVAC insulation systems.
Condensation Prevention (Primary Function): The reinforced foil layer functions as a highly reliable vapor barrier, preventing ambient moisture from reaching the cold surface of the air ducts. This eliminates the risk of system corrosion and insulation dampening.
Pipeline Insulation: Effective thermal covering for large-diameter pipe networks to maximize energy savings.
Acoustic Dampening: Absorbs operational noise traveling through air distribution channels, significantly upgrading indoor acoustic comfort.
Product Specifications
- Material: Glass Wool (Mineral Fiber)
- Density Range: 9 – 30 kg/m³
- Standard Length: 12,500 mm and greater
- Standard Width: 1200 mm
- Available Thicknesses: 50 – 200 mm
- Facing Option: Reinforced Aluminum Foil (Alu-Foil Faced)
- Reaction to Fire (Fire Class): Class A1 (Non-combustible core base)
- Thermal Conductivity (λ): From λ=0.035 W/m·K to λ=0.040 W/m·K
- Standards & Compliance: TS EN, TS EN ISO, DIN
Other Products
Stone wool pre-formed pipe sections, plain and foil-faced
Product Description
A ready-made solution for pipeline thermal insulation, manufactured from high-quality stone wool. The fibers in the product are oriented circumferentially around the cylinder, providing additional structural strength and efficiency.
The product is available both plain (unfaced) and faced with aluminum foil, which additionally serves as a vapor barrier. There are two main types of cylinders: with a density of 50 kg/m³ and 100 kg/m³, while for thin-walled configurations, the density can reach up to 145 kg/m³. Due to these technical properties, the pipe sections provide effective insulation for a wide range of engineering systems
Product Application
Industrial and process equipment: Insulation of pipelines, tanks, and vessels in the oil & gas, chemical, and power generation industries.
Heating and hot water systems (HVAC): Protection against heat loss in residential, commercial, and industrial buildings.
Insulation for temperature maintenance and noise reduction.
Steam pipelines and flues (chimneys): Effective protection against high temperatures.
Product Specifications
- Material: Stone Wool
Density: 100 to 145 kg/m³. Depends on wall thickness and the inner diameter of the cylinder. For thicknesses of 40 mm and above, the density is 100 kg/m³, while for thinner cylinders it can be higher (up to 145 kg/m³). - Length: 1200 mm
- Wall Thickness (mm): 25; 30; 40; 50; 60; 80; 100
- Inner Diameter (mm): 15; 21; 27; 33; 42; 48; 60; 76; 89; 114; 140; 169; 219; 273; 324; 356
- Facing: Unfaced / Faced with aluminum foil (Al-foil)
Reaction to Fire (Fire Class): A1 - Maximum Service Temperature: 600 °C
- Water Absorption: ≤ 1 kg/m³
- Thermal Conductivity lambda):
Density 50 kg/m³:
at 50 °C: 0.045 W/m·K
at 100 °C: 0.055 W/m·K
at 150 °C: 0.063 W/m·K
at 200 °C: 0.070 W/m·K
at 250 °C: 0.090 W/m·K
Density 100 kg/m³:
at 50 °C: 0.045 W/m·K
at 100 °C: 0.055 W/m·K
at 150 °C: 0.063 W/m·K
at 200 °C: 0.070 W/m·K
at 250 °C: 0.090 W/m·K - Packaging Material: Polyethylene bag (PE Bag), Carton box (Carton Box)
Standards & - Certifications: TS EN 14303, EN 823, EN 13467, TS EN 12667, EN 12939, EN 13787, EN 13472
Industrial Wired Mat (Stone Wool Blanket) with density 50, 80, 100, and 125 kg/m³, stitched with galvanized wire
Product Description
This is a stone wool blanket used for thermal insulation and fire safety of industrial plants, vessels, process equipment, and large-diameter pipes.
Product Application
High-temperature insulation: The non-combustibility of industrial stone wool coatings allows them to be used for thermal, acoustic, and fire insulation at extremely high temperatures.
High-temperature pipelines at industrial facilities.
Power plants.
Petrochemical and gas refineries.
High-temperature resistance: It serves as an ideal solution for industrial applications requiring premium thermal stability.
Product Specifications
- Material: Stone Wool
- Density: 50; 80; 100; 125 kg/m³
- Length: 2000 mm – 8000 mm
- Width: 500 mm and 1000 mm
- Thickness: 30; 40; 50; 60; 80; 100; 120 mm
- Facing / Mesh: Stitched with galvanized wire mesh
- Reaction to Fire (Fire Class): A1
- Water Vapor Diffusion Resistance ($\mu$): 1
- Packaging Material: Polyethylene film (PE film)
- Standards: TS EN, TS EN ISO
Thermal Conductivity (lambda):
- Density 80 kg/m³:
- at 50 °C: 0.048 W/m·K
- at 100 °C: 0.063 W/m·K
- at 150 °C: 0.073 W/m·K
- at 200 °C: 0.083 W/m·K
- at 250 °C: 0.093 W/m·K
- Density 100 kg/m³:
- at 50 °C: 0.048 W/m·K
- at 100 °C: 0.058 W/m·K
- at 150 °C: 0.068 W/m·K
- at 200 °C: 0.078 W/m·K
- at 250 °C: 0.089 W/m·K
- Density 125 kg/m³:
- at 50 °C: 0.047 W/m·K
- at 100 °C: 0.057 W/m·K
- at 150 °C: 0.067 W/m·K
- at 200 °C: 0.077 W/m·K
- at 250 °C: 0.087 W/m·K
Industrial Stone Wool Slabs
Product Description
Industrial stone wool slabs are high-performance thermal insulation boards designed for heavy-duty engineering systems, including large-scale HVAC insulation networks. Available either unfaced or with various factory-applied facings—such as yellow/black glass tissue and aluminum foil—these slabs are manufactured in two distinct density options: 70 kg/m³ and 110 kg/m³. Each density is optimized with specific technical properties to provide superior structural stability, acoustic dampening, and thermal efficiency for industrial air handling and ventilation systems.
Product Application
The outstanding non-combustible properties of these industrial stone wool slabs make them an ideal choice for high-temperature thermal, acoustic, and fire isolation within demanding HVAC insulation projects.
Installation Method: The technical slabs are mounted onto flat or structured surfaces using specialized insulation pins and retaining washers.
Cladding & Framing: Once secured, they are typically covered with an outer sheet metal jacketing (cladding) or integrated into a structural framework built on the surface.
Prefabricated Systems: These high-density boards are also perfectly suited for use inside prefabricated sandwich panels and modular air distribution casings.
Product Specifications
- Material: Stone Wool (Mineral Rock Wool)
- Available Densities: 70 kg/m³ and 110 kg/m³
- Standard Dimensions: Length 1200 mm $\times$ Width 600 mm
- Available Thicknesses: 25; 40; 50; 60; 80; 100; 120 mm
- Facing Variations: Plain (unfaced), yellow glass tissue, black glass tissue, or aluminum foil faced (alu-foil).
- Reaction to Fire (Fire Class): Class A1 (Non-combustible)
- Water Vapor Diffusion Resistance ($\mu$): 1
- Packaging Material: Polyethylene film (PE Film)
- Standards & Compliance: TS EN, TS EN ISO
Thermal Conductivity (lambda) for 70 kg/m³ Density:
- at 50 °C: 0.046 W/m·K
- at 100 °C: 0.056 W/m·K
- at 150 °C: 0.070 W/m·K
- at 200 °C: 0.080 W/m·K
- at 250 °C: 0.101 W/m·K
Thermal Conductivity ($\lambda$) for 110 kg/m³ Density:
- at 50 °C: 0.047 W/m·K
- at 100 °C: 0.057 W/m·K
- at 150 °C: 0.072 W/m·K
- at 200 °C: 0.081 W/m·K
- at 250 °C: 0.103 W/m·K
Lamella Mat (Stone Wool)
Product Description
A lamella mat is a flexible roll material for pipe insulation and duct protection made of stone (basalt) wool, where the fibers are oriented perpendicular to the insulated surface. It is typically supplied with an outer facing of reinforced aluminum foil. This perpendicular fiber orientation provides high tensile strength and minimal deformation on bend
Product Application
A lamella mat is a specialized tank insulation, pipe insulation and technical system solution where flexibility, a reliable vapor barrier, and resistance to bending are required:
- Air Ducts (HVAC): Thermal and vapor insulation for rectangular and round air ducts. The foil facing acts as a vapor barrier to prevent condensation.
- Pipelines: Efficient pipe insulation for large-diameter networks, hot and cold water supply, and process lines.
Product Specifications
Material: Stone Wool (Basalt Wool)
- Facing: Reinforced aluminum foil (serves as a vapor barrier and heat reflector)
- Fiber Orientation: Perpendicular to the surface (ensures flexibility and high tensile strength)
- Reaction to Fire (Fire Class): Non-combustible (A1) for the base wool; the facing may have an additional rating depending on the adhesive layer.
- Operating Temperature Range: Typically up to +250°C (the base wool withstands much higher temperatures, but the foil backing limits the outer surface temperature).
- Density: Typically ranges from 35 to 50 kg/m³ (lower than wired mats due to the perpendicular fiber structure). Standard grades: 35, 40, 50 kg/m³.
- Length: 2000 mm – 10000 mm (depending on thickness)
- Width: Standard 1000 mm
- Thickness: 20, 30, 40, 50, 60, 80, 100 mm
- Water Vapor Diffusion Resistance (μ): ≈1 for the base stone wool. However, the aluminum foil facing acts as a virtually absolute vapor barrier, preventing moisture penetration.
- Water Absorption: Extremely low (hydrophobic properties).
- Standards: TS EN, TS EN ISO
Thermal Conductivity (λ) for density 40 kg/m³: - at 10 °C: ≈0.037 W/m·K
- at 50 °C: ≈0.041 W/m·K
- at 100 °C: ≈0.050 W/m·K
IZOCAM Pre-formed Glasswool Pipe Sections 450°C
Product Description
High-temperature pre-formed sections are rigid, ready-to-use pipe insulation products made of high-quality fiberglass (Glasswool). They are specifically engineered for the thermal insulation of medium and large-diameter pipelines. Due to their high density and precise geometric shaping, they ensure a perfect fit around the pipe, minimizing energy loss.
- Design & Structure: These cylindrical sections are supplied with an integrated facing of non-combustible aluminum foil (Al-foil). The foil serves as a durable protective layer and acts as an efficient barrier against water vapor penetration.
- Installation: Each insulation segment features a standard length of 1200 mm with a minor tolerance of
Product Application
This premium pipe insulation is designed for engineering and utility systems that require highly efficient thermal protection and exceptional resistance to elevated temperatures.
- Industrial Pipelines: Thermal insulation of process lines transporting hot fluids, steam, or gases with operational temperatures reaching up to 450°C.
- Heating Networks & Boiler Rooms: Protection of piping systems within heating stations and boiler rooms to maximize energy efficiency and minimize heat dissipation.
- Personnel Protection: Reliable shielding of hot surfaces to prevent occupational accidental burns among maintenance personnel.
- Cold Circuit Systems: Effective utilization of the aluminum foil facing as a dependable vapor barrier to protect cold lines from condensation and moisture accumulation
Product Specifications
- Maximum Service Temperature: The material features an exceptionally high maximum service temperature of 450°C, proving its suitability for demanding high-temperature industrial applications (in compliance with TS EN 14707).
- Standard Length: Each pipe insulation cylinder segment has a standard length of 1200 mm across all size variations.
- Fire Safety (Reaction to Fire): The product equipped with non-combustible aluminum foil achieves a fire reaction class of A2L-s1,d0 (according to TS EN 13501-1), signifying extremely limited combustibility and minimal smoke emission.
- Packaging Material: Polyethylene film (PE Film) is used to protect the insulation sections during transportation and storage.
- Standards & Certifications: TS EN, TS EN ISO
Declared Thermal Conductivity (lambda) according to EN ISO 8497:
- at 50 °C: 0.035 W/m·K
- at 150 °C: 0.052 W/m·K
- at 300 °C: 0.106 W/m·K
Available Inner Diameters (DN / Pipe Size):
Suitable for pipes with a nominal inner diameter ranging from 13 mm (1/2″) to 356 mm (14″). The full range of available diameters includes:
- 13, 21, 27, 33, 42, 48, 60, 76, 89, 114, 140, 169, 219, 273, 325, and 356 mm.
Available Wall Thicknesses:
This pipe insulation is offered in a wide selection of insulation thicknesses (from 20 mm to 100 mm) to achieve the required thermal resistance (R-value) for diverse operating conditions:
- Small diameters (1/2″ to 1 1/2″): Available in insulation thicknesses from 20 mm to 60 mm.
- Medium diameters (2″ to 4″): Available in insulation thicknesses of 20, 80, and 100 mm.
- Large diameters (6″ to 14″): Available in insulation thicknesses from 25 mm to 100 mm.
IZOCAM Pre-formed Glasswool Pipe Sections 200⁰C
Product Description
Glass wool pre-formed pipe sections are rigid, ready-to-install cylindrical segments manufactured from high-density fiberglass (Glass Wool). They are engineered to provide highly efficient thermal protection and acoustic insulation for various piping systems.
This heavy-duty pipe insulation is available either unfaced (plain) or equipped with an integrated aluminum foil facing. The aluminum foil cover is non-combustible and serves as an effective vapor barrier, which significantly simplifies the installation process on cold utility lines
Product Application
Pre-formed cylindrical sections provide comprehensive technical protection for utility networks, delivering high thermal efficiency, sound dampening, and reliable fire safety.
- Thermal Pipeline Insulation: Used for the energy-efficient thermal protection of industrial process lines, central heating systems, and solar energy installations.
- Environmental Protection: Applied as a robust pipe insulation layer to protect utility networks against freezing temperatures and internal condensation.
- Acoustic and Vibration Insulation: Utilized for sound deadening and vibration dampening along pressurized water supply pipes.
- Specialized Application Areas: Ideal for insulating pipelines passing through concrete walls or floor slabs, providing essential acoustic and vibration isolation at pipe-to-structure transit points
Product Specifications
- Maximum Service Temperature: The material has a maximum operational temperature limit of 250°C.
- Fire Safety (Reaction to Fire): Unfaced sections feature the highest non-combustible classification of Class A1. Foil-faced insulation cylinders achieve a reaction to fire class of A2L-s1,d0.
- Water Absorption: This pipe insulation features low moisture absorption properties, with a maximum limit of 1 kg/m².
- Standard Length: Each insulation segment features a standard length of 1200 mm with a dimensional tolerance of
- Available Inner Diameters (DN / Pipe Size): Available for piping systems with nominal inner diameters ranging from 13 mm (1/4″) to 356 mm (14″).
- Available Wall Thicknesses: The insulation cylinders are manufactured in wall thicknesses ranging from 25 mm to 100 mm.
Thermal Conductivity ()
Declared Thermal Conductivity ():
- at 50 °C: 0.036 W/m·K
- at 150 °C: 0.050 W/m·K
- at 250 °C: 0.069 W/m·K
- Maximum declared value is below 0.035 W/m·K under standard reference conditions.
Purpose & Benefits
- Energy Efficiency: Drastically reduces thermal losses or heat gain within pipelines and air ducts. This results in significant energy savings for heating, ventilation, and air conditioning operations across massive facilities, office complexes, residential buildings, airports, and industrial complexes.
- Condensation Control: Defends the entire system against moisture accumulation, preventing surface dripping, structural damage, mold growth, and subsequent equipment corrosion.
- Fire Safety & Compliance: The integration of non-combustible material bases reinforces structural integrity during thermal emergencies, delaying system failure and reducing the risk of flame propagation through ventilation shafts.
- Noise Reduction & Acoustics: High-performance HVAC insulation dampens structural vibrations and airflow acoustics generated by mechanical equipment, substantially upgrading indoor acoustic comfort.
Frequently Asked Questions (FAQ)
Which materials are best suited for industrial HVAC insulation?
We supply material configurations engineered for specific operational environments: mineral (stone) wool for high-temperature setups, fiberglass blankets, cellular glass for chemically aggressive environments, and flexible elastomeric foam for refrigeration and chilled water systems.
Is it possible to supply industrial insulation custom-tailored by size, density, and facing?
Yes, we specialize in supplying customized technical insulation. We deliver high-performance materials manufactured to your project’s precise dimensions, physical densities, and configurations. Additionally, we provide protective external jackets (metal cladding, polymer facings, and other specialized barriers) tailored exactly to your engineering specifications.